Free Shipping

on orders over $100. Offer valid on Tools and Equipment Only. Restrictions Apply.
Your Cart  | 0 Items $0.00
MENU

Pull Bars

  • Crain No. 557 Hardwood Pry Bar
    Crain No. 557 Hardwood Pry Bar
    Crain No. 557 Hardwood Pry Bar This specialized bar for wedging bowed planks into position has a curve-shaped end with a sharp point. Place the curve-shaped end against a bowed board and hammer on the opposite end. As the sharp point on the curve-shaped end is driven downwards into the subfloor, a wedging action is created that forces the bowed board into place, eliminating the joint gap. The... Crain No. 557 Hardwood Pry Bar This specialized bar for wedging bowed planks in...
    $11.95

  • Crain No. 558 Staple Set Tool
    Crain No. 558 Staple Set Tool
    Crain No. 558 Staple Set Tool This hand held stapling tool manually drives staples and L-shaped cleats made for ¾" solid hardwood planks. It can finish off staples and L-shaped cleats after misfires of the nailer. It can manually drive staples and L-shaped cleats in tight areas where nailers don't fit, and is a fast solution for repair work without the need for a compressor. After... Crain No. 558 Staple Set Tool This hand held stapling tool manually drives stap...
    $93.50

  • Crain No. 559 Close To Wall Staple Tool
    Crain No. 559 Close To Wall Staple Tool
    Crain No. 559 Close to Wall Staple Tool This close to wall stapling tool can manually staple ¾" solid hardwood planks generally within one board width of the wall. It reduces the need for gluing the planks close to the wall, or top nailing and puttying work. The padded base rests safely on top of the planks, and the back foot rests on the subfloor, so that the tongue is protected from... Crain No. 559 Close to Wall Staple Tool This close to wall stapling tool can ma...
    $98.50

  • Crain No. 560 Knuckle Head Pull Bar
    Crain No. 560 Knuckle Head Pull Bar
    Crain No. 560 Knuckle Head Pull Bar This steel pull bar is designed to take heavy hammering when necessary to pull planks together. It has a boxed "knuckle-shaped" hammering head that is welded to the body. The 3/16" thick body is made 3" wide to reduce bending down the length as it is hammered. The tool is 16 1/2" long overall to create 14 1/2" of working room when... Crain No. 560 Knuckle Head Pull Bar This steel pull bar is designed to take hea...
    $18.35

  • Crain No. 563 7" Tapping Block
    Crain No. 563 7" Tapping Block
      Crain No. 563 7" Tapping Block This plastic block for tapping and moving planks transmits force from a hammer or mallet in a manner that protects the edges of the plank. The block is sized at 3" wide x 7" long x 3/4" thick. The bottom surface has relieved edges on one side and one end. When the block is placed on a plank at its relieved edge, it can tap the plank...   Crain No. 563 7" Tapping Block This plastic block for tapping and m...
    $15.41

  • Crain No. 569 11.75" Tapping Block
    Crain No. 569 11.75" Tapping Block
    Crain No. 569 11.75" Tapping Block This 11 3/4" long tapping block is machined from 3/4" thick solid plastic. It is used along with a hammer to tap the sides or ends of the boards together to eliminate gaps. The bottom edge is relieved on one side and one end. The relieved bottom edge is placed over the tongue of the board to be tapped. In this position, the body of the tool... Crain No. 569 11.75" Tapping Block This 11 3/4" long tapping block is...
    $20.90