Free Shipping Available On Most Orders Over $100!

Shopping Cart
SGM MMG1 Mortar Mix - 60 Lb. Bag
(image for) SGM MMG1 Mortar Mix - 60 Lb. Bag
(image for) SGM MMG1 Mortar Mix - 60 Lb. Bag
  • Model: MMG-60
  • Shipping Weight: 51 lbs
  • In Stock: 0
  • Availability: Out of Stock
  • Manufactured by: SGM

SGM MMG1 Mortar Mix - 60 Lb. Bag


(image for) Call for Price


Report a cheaper price seen elsewhere

We're so confident in our low prices, we offer a Beat-a-Price Guarantee:
We'll beat our competitors' Out the Door price on any identical product.
(Proof of Advertised Price Required)!

  • This product was added to our catalog on Saturday 25 January, 2025.
Description

(Pre-Blended Mortar Type S) SGM Mortar Mix Surface Preparation is a computerized blend of special high strength masonry cement, proprietary admixtures, and sand developed to produce a consistent quality mix from batch to batch eliminating costly job-site mixing of these components. SGM Mortar Mix Surface Preparation is conveniently packaged in sixty (60) pound (27.2 kg) and eighty (80) pound (36.3 kg) four-ply polyethylene lined bags and custom palletized for easy handling and movement on the job-site. Use for laying block, stone, brick, tuck-pointing, scratch, brown, or finish coat stucco. SGM Mortar Mix Surface Preparation is ideally suited for use as a substrate for hard surface flooring both interior and exterior applications.

INSTALLATION SURFACE PREPARATION

  • Concrete and Plaster Surfaces: All masonry should be twenty-eight (28) days cured and shall be structurally sound, clean, and free of any moisture, wax, oil, paint particles, curing agents, or foreign matter. Remove any liquid curing agents or concrete sealers, followed by a clear water wash.

MIXING

Using a clean mortar box or mechanical mixer, add sufficient cool clean potable water to desired, plastic-like, consistency. For additional strength and performance add Southcrete™ 25 Acrylic Mortar Admix in lieu of water. Do not re-temper mortar mix; discard and prepare fresh mix. Machine mixing is preferred.

  • NOTE: All cement-based products have the potential for efflorescence to materialize. This whitish powder or crystalline deposit may become visible before, during, or after installation is completed. Water with a high mineral content can also cause efflorescence.

DIRECTIONS

  • READ ENTIRE LABEL AND PIS/MSDS BEFORE USING.

CAUTION

Product is alkaline on contact with water. Use paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and CALL A PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not take internally. CONTAINS FREE SILICA — DO NOT BREATHE DUST. Prolonged exposure to dust may cause delayed lung disease (Silicosis).

WARNING: This product may expose you to chemicals, including silica, which the State of California recognizes as a cause of cancer. For more information, visit the Proposition 65 Warnings Website (www.P65Warnings.ca.gov). Use NIOSH approved masks at all times to handle silica dust. KEEP OUT OF REACH OF CHILDREN.

APPLICATION

Follow manufacturers suggested installation methods. All materials and effected areas should remain above 40°F / 4.4°C (forty degrees Fahrenheit / 4.4 degrees Celsius) or below 100°F / 38°C (100 degrees Fahrenheit / 38 degrees Celsius) 24-hours prior and 72-hours after placement.

CLEANING

Water is all that is required to remove uncured mortar.

COVERAGE

For Setting Block

Bag SizeStandard Blocks
8″ x 8″ x 16″
(200 mm x 200 mm x 410 mm)
Standard Bricks
8″ x 2″ x 4″
(200 mm x 50 mm 100 mm)
60 lbs.
(22.2 kgs.)
928
80 lbs.
(36.3 kgs.)
1237

P> For Thick-Bed Underlayment

Bag Size   Square Feet at ½ inch   Square Feet at one (1) inch
60 lbs.
(22.2 kgs.)
126
80 lbs.
(36.3 kgs.)
168

SHELF LIFE

Up to one (1) year from date of manufacture in an unopened, properly store container.

MAINTENANCE

None is required.

Reviews (0)
There are currently no product reviews.
Back to Top