Free Shipping Available On Most Orders Over $100!
There is no product that matches the search criteria.
Your cart is empty.
Product 41/52
(Pre-Blended Mortar Type S) SGM Mortar Mix Surface Preparation is a computerized blend of special high strength masonry cement, proprietary admixtures, and sand developed to produce a consistent quality mix from batch to batch eliminating costly job-site mixing of these components. SGM Mortar Mix Surface Preparation is conveniently packaged in sixty (60) pound (27.2 kg) and eighty (80) pound (36.3 kg) four-ply polyethylene lined bags and custom palletized for easy handling and movement on the job-site. Use for laying block, stone, brick, tuck-pointing, scratch, brown, or finish coat stucco. SGM Mortar Mix Surface Preparation is ideally suited for use as a substrate for hard surface flooring both interior and exterior applications.
INSTALLATION SURFACE PREPARATION
MIXING
Using a clean mortar box or mechanical mixer, add sufficient cool clean potable water to desired, plastic-like, consistency. For additional strength and performance add Southcrete™ 25 Acrylic Mortar Admix in lieu of water. Do not re-temper mortar mix; discard and prepare fresh mix. Machine mixing is preferred.
DIRECTIONS
CAUTION
Product is alkaline on contact with water. Use paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and CALL A PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not take internally. CONTAINS FREE SILICA — DO NOT BREATHE DUST. Prolonged exposure to dust may cause delayed lung disease (Silicosis).
WARNING: This product may expose you to chemicals, including silica, which the State of California recognizes as a cause of cancer. For more information, visit the Proposition 65 Warnings Website (www.P65Warnings.ca.gov). Use NIOSH approved masks at all times to handle silica dust. KEEP OUT OF REACH OF CHILDREN.
APPLICATION
Follow manufacturers suggested installation methods. All materials and effected areas should remain above 40°F / 4.4°C (forty degrees Fahrenheit / 4.4 degrees Celsius) or below 100°F / 38°C (100 degrees Fahrenheit / 38 degrees Celsius) 24-hours prior and 72-hours after placement.
CLEANING
Water is all that is required to remove uncured mortar.
COVERAGE
For Setting Block
P> For Thick-Bed Underlayment
SHELF LIFE
Up to one (1) year from date of manufacture in an unopened, properly store container.
MAINTENANCE
None is required.
Product Information Sheet – English
SDS: