TEC 316 HydraFlex Waterproofing Crack Isolation Membrane - 3.5 Gal. Pail
Ready-to-use, flexible, mold and mildew resistant waterproofing crack isolation membrane for interior and exterior applications. Forms a smooth, monolithic, watertight surface over walls, floors and ceilings. HydraFlex™ Membrane stops in-plane cracks up to 1/8" (3 mm) or up to 1⁄4" (6 mm)* wide at the subfloor from telegraphing through to ceramic and stone tile. For residential to extra heavy commercial applications.
*Based on application
-
• Exceeds ANSI A118.10 Specifications for Waterproof Membranes
• Exceeds ANSI A118.12 Specifications for Crack Isolation Membranes
• Use for Positive Hydrostatic Pressure Applications
• Fast Drying – ready for tile installation in 1 to 3 hours
• Easy roller, trowel or spray application
• No mesh required (except for waterproofing installations at changes in-plane
and substrate joints)
• Apply over new (green) concrete as little as 3 days old
• Isolates cracks from 1/8" (3 mm) up to 1⁄4" (6 mm)*
• Membrane resistant to growth of mold and mildew
• IAPMO approved
• Approved over control joints
• Contributes to LEED® project points
• Low VOC
*Based on application
Exceeds ANSI A118.10 Specifications for Waterproof Membranes
- Exceeds ANSI A118.12 Specifications for Crack Isolation Membranes
- Use for Positive Hydrostatic Pressure Applications
- Fast Drying – ready for tile installation in 1 to 3 hours
- Easy roller, trowel or spray application
- No mesh required (except for waterproofing installations at changes in-plane and substrate joints)
- Apply over new (green) concrete as little as 3 days old
- Isolates cracks up to 1/8" (3 mm) or up to 1⁄4" (6 mm) based on application
- Membrane resistant to growth of mold and mildew
- IAPMO approved
- Approved over control joints
- Contributes to LEED® project points
- Low VOC
WEIGHTS AND COVERAGE
SIZE
|
PACK
|
WEIGHT
|
COVERAGE
|
1 gal.
3.5 gal.
5 gal.
|
2
1
1
|
24 lbs.
47 lbs.
55
|
up to 100 sq.ft./gal
|
|
Downloads