AAT-725 is a two part urethane adhesive suitable for indoor and outdoor installations of many types of sports flooring and synthetic turf. This high performance adhesive is ideal for installations of a wide range of resilient flooring over concrete slabs with very high moisture content and in building entrances where extreme moisture exposure is expected. AAT-725 has an extremely high shear strength making it the perfect choice for areas with heavy traffic and rolling loads. There is no flash time required so installation can begin immediately. In addition to sports flooring and synthetic turf, the AAT-725 is approved for the installation of vinyl tile and plank [VCT, VET, SVT, LVT, LVP], sheet vinyl [homogeneous intended for "full spread" installations and felt backed], rubber flooring, cove base, underlayments, and cork flooring. AAT-725 should not be used for flooring with backings composed of polyolefin, polyethylene, or polypropylene. The AAT-725 no-slump formula is solvent and water free, nonflammable, very low odor and is a certified "very low emission" adhesive. The adhesive is easy to spread, has a strong green grab and remains flexible. The adhesive is waterproof when cured, however, it is not a moisture inhibitor.

• 2 part urethane adhesive yields very high shear & tensile strengths
• Permanently waterproof formula
• Great for heavy traffic & rolling loads
• 25#MVER/100% in situ RH
• Solvent free, 0 VOC, LEED qualified