High-Performance Concrete Patch
Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.
- Natural gray to blend with existing concrete
- Ease of placement, with variable water ratios
- Mapecem Quickpatch can be applied from 1/16" to 1-1/2" (1.5mm to 3.8cm) neat and from 1-1/2" to 3" (3.8 to 7.5cm) neat in areas no larger than 24sq. ft. (2.23m²). Larger areas will require Mapecem Quickpatch to be extended.
- Mapecem Quickpatch can be primed and covered with a leveler, a cement-based overlay or a tile-setting mortar in as little as 90 minutes, depending on temperatures.
- Moisture-controlling adhesives or moisture mitigation systems can be used over Mapecem Quickpatch in as little as 16 hours.
- Floor coverings can be installed in as little as 16 hours after application as long as the existing subfloor meets the requirements of the mortars or adhesives used for installation.