Taylor 2071 Tuff-Lok X-Link Wood Flooring Adhesive with Meta-Tec Technology, is a high solids, cross linking, AmideEster-Acrylate, resin-based adhesive formulated for the interior installation of dry-back parquet, engineered wood plank, acrylic impregnated plank, and pre-finished and unfinished solid wood flooring. It is solvent free, has a low VOC content, contains no hazardous chemicals as per OSHA Regulation CFR 1910.1200 and it is a nonflammable, low odor adhesive that meets all federal, state, and local governmental indoor air quality regulations. This specially formulated adhesive has good early strength buildup for immediate grab and gradually builds into a tenacious but resilient bond as the chemicals in the adhesive cross-link.
- Association grade underlayment plywood
- Association grade particleboard
- Cork underlayments
- Vinyl tile
- Sheet flooring
- Radiant heated subfloors where surface
temperatures do not exceed 85 Degrees F (29.40 Degrees C)
- Concrete
- Terrazzo (properly prepared with all waxes and surface finishes removed)
- Coverage: 50-180 sf/gal
- Packaging: 1 and 4 Gallon
Approved Flooring Types:
- Engineered wood
- Solid wood up to 3/4"
- Acrylic impregnated wood
- Dry Back parquet
