TAYLOR Meta-Tec MS-Plus Advance Wood Flooring Adhesive with Meta-Tec Technology, is a one component 100% solids, cross linking, MS polymer-based adhesive formulated for the interior installation of wood block parquet, engineered wood plank, acrylic impregnated plank, bamboo and pre-finished and unfinished solid wood flooring. TAYLOR Meta-Tec MS-Plus Advance also has good concrete moisture inhibition capability as well as good sound reduction properties that meets the IIC and STC building code requirements. Concrete floors over one year old with high moisture readings are usually indicative of a chronic underlying moisture source problems which must be determined prior to the wood flooring installation.
MS-Plus Advance is solvent free and isocyanate free, has negligible VOC content, contains no hazardous chemicals as per OSHA Regulation CFR 1910.1200 and is a nonflammable, low odor adhesive that meets all federal, state, and local governmental indoor air quality regulations. This specially formulated adhesive has good early strength buildup for immediate grab and quickly builds into a tenacious but elastic resilient bond as the adhesive cross-links.
- APA grade underlayment plywood
- Association grade particleboard
- Fully secured cork underlayments
- Existing well-bonded vinyl
- Tile and sheet flooring
- Terrazzo
- Cementitious and Anhydrite screeds
- Concrete
- Radiant heated subfloors where surface temperatures do not exceed 85 Degrees F (30 Degrees C)
- Coverage: 20-70 sf/gal
- Packaging: 4 Gallon
Approved Flooring Types:
- All solid wood, engineered wood & bamboo, pre-finished or unfinished, all thickness
- Dry-back wood parquet
