Dry-Set Grout is designed to be used in grout joints 1/8″ wide or less when installing glazed bisque bodied tiles, marble, or granite. Available in 32 designer and decorator colors to complement every wall, countertop, and backsplash.

CHARACTERISTICS

• Mildew resistant
• High strength
• Easy clean up
• Excellent workability
• Non-toxic

PREPARATION

Important Facts To Know Before Grouting: Uneven color variations are caused by the following: sun and wind exposure, variations in grout joints, excessive amounts of water, uneven glaze patterns on sides of tiles, using a sponge during cleanup, moisture in setting bed, and different batches of grout. Mortar beds should be allowed to dry thoroughly before grouting, approximately 48 hours for thin-bed method and 72 hours for thick bed method. Keep grout joint width and depth the same. If tiles spacers are used, remove before grouting. Mix each batch of grout with the same minimum amount of water, and mix the same way each time.

Misting (fogging) the entire installation prior to grouting will help control the hydration of the Portland cement grout and will prevent rapid water loss in hot, dry temperatures. NOTE: do not allow water to puddle or remain present during grouting. Use only the same lot numbers. If separate batch numbers have to be used, dry blend to obtain a uniform color. Application of grout release may be necessary to avoid staining of some tiles. Consult tile manufacture.

APPLICATION

Add sufficient cool, clean water to form a smooth paste-like trowable mix. Approximately ¾ gallon (2.84)L) of liquid to 25lb. (1.3kg) of powder. Allow the mix to slake for 5 to 10 minutes, then re-mix before application. Spread grout over the surface of the tile with a soft rubber grout float. Work diagonally across tiles to ensure complete filling of the joints. Remove excess grout from the face of tiles as work progresses. After grout haze appears and grout becomes firm, polish tile and dress grout joint with a clean polishing cloth. Dampen if necessary.

CURING

The minimum cure is reached in 24 hours any type of traffic should be restricted to 72 hours. For maximum strength wet grout joint each day with a damp sponge for two to three days. As grout loses water, it will get lighter in color.

TECHNICAL DATA

Meets ANSI A118.6 & A118.7 / A108.10.

• 28-Day Compressive Strength: >3,500 psi
• Water Absorption:  < 10
• Shore D Hardness:  > 70

CAUTION

WARNING — EYE IRRITANT CONTAINS PORTLAND CEMENT. Product is alkaline on contact with water. Use paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and CALL A PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not take internally. CONTAINS FREE SILICA — DO NOT BREATHE DUST. Prolonged exposure to dust may cause delayed lung disease (Silicosis). 

SHELF LIFE

Up to one (1) year from date of manufacture in unopened, properly stored containers.