- (727) 807-9516
- Weekdays : 07:30AM to 06:00PM and Saturday : 08:00AM to 3:00PM Sunday: By Appointment Only
TackStrip Tools
Better Tools BT360 16 Oz. Forged Steel Framing Hammer
$15.15
This 16 oz. claw hammer is good for hammering down and pulling up tack strip. Forged steel head is induction hardened and includes a magnetic nail... more info
Better Tools BT703-TP Trim Puller by Zenith
$42.69
A revolutionary, patented tool that does all the work of a pry bar and claw but without the damage. The Trim Puller is designed specifically for... more info
Crain 157 Molding Lifter
$17.03
This steel pry bar is designed to get behind wood base and moldings and pry them off with a minimum of damage. Both the rocker and flat ends have... more info
Crain 159 Vaughan Superbar
$23.24
The Vaughan 15" Superbar is the classic heavy-duty pry bar. Features a fully rounded "shepherd's crook" rocker end for maximum... more info
Crain 166 Magnetic Driving Bar
$81.55
This long-nosed hammering tool extends beneath toe-spaces and other low clearance areas to drive tack strip nails and other nails into the subfloor.... more info
Crain 172 Magnetic Tack Holder
$32.41
This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers... more info
Crain 332 20 Oz. Economy Hammer
$19.05
This 20 oz. claw hammer is good for hammering down and pulling up tack strip. Forged steel head is induction hardened and includes a magnetic nail... more info
Crain 362 Door Pin Tool
$24.97
This tool has a wedge with forked-shaped edge on one end and a solid steel pin on the other for removing door pins from types of hinge assemblies. If... more info
Crain 363 Deluxe Door Pin Tool
$28.64
This wedge-shaped tool has a forked-shaped edge on one end with a capture spring that holds the greasy pin on the fork, preventing it from falling on... more info
Crain 401 6-in-1 Screwdriver
$9.47
This screwdriver converts between the four most needed Phillips and slotted screwdriving tips, and provides two nutdriver sockets as well. Includes... more info
Crain 450 Deluxe Strip Cutter
$78.77
The deluxe strip cutter has long 1 7/8 " blades that can cut wide architectural strip straight in a single cut. It can also cut regular strip... more info
Crain 451 Strip Cutter Blades - 12 Pack
$8.58
This package of replacement blades for the Crain No. 450 Deluxe Strip Cutter includes twelve blades. When used in the No. 450 Deluxe Strip Cutter,... more info
Crain 455 Tack Strip Box Saver Bag
$44.76
This heavy-duty cloth bag slips over standard-sized four foot long tackless strip boxes. The bag helps prevent the boxes from tearing and breaking... more info
Crescent Tools NP11 11" Nail Puller Pliers
$48.44
This tool allows for one handed removal of nails, staples, cleats and more from wood without damaging the surface. The parallel jaws and curved head... more info
Gundlach 151 Magnetic Driving Bar
$69.12
This Magnetic Driving Bar is an excellent tool for nailing tackless strip in hard to reach places, such as under radiators, wall heaters and toe... more info
Gundlach 222 14 Oz. Magnetic Tack Hammer
$49.23
Forged from a special grade tool steel, the head of this hammer is highly polished. Guaranteed to hold magnetism permanently. Has a tough hickory... more info
Gundlach 4-1 2-1/2" Carpet Awl
$3.98
An ideal tool for scribing, picking seams and other carpet work. Has plastic handle and tapered blade. more info
Gundlach 41 6-in-1 Screwdriver
$8.95
A quality, professional grade tool featuring four different bits in one easy to handle screwdriver. Precision machining makes for simple, easy... more info
Gundlach 57-ML Moulding Lifter
$16.33
This tool gives positive leverage control to avoid denting the baseboard. It is also specially designed to lift the moulding at approximately the... more info
Gundlach 61-5 18 Oz. Carpet Hammer
$149.95
Preferred by many mechanics because the long head makes corner work easier. Has a claw at one end and is well balanced. The polished 5/8" diameter... more info
Gundlach 615 Magnetic Tack Holder - 5 1/2"
$21.60
This tool has a precision magnetic tip that can hold nails in position so they can be driven into areas where it would be difficult with fingers... more info
Gundlach 870 Stand-Up Concrete Nail Driver
$93.89
Drive concrete nails from a standing position with a single blow from this tool. Outer sleeve tube guides the inner driver bar to drive nails and... more info
Gundlach 870-RMT Replacement Magnetic Tip
$26.38
Replacement Magnetic Tip. Fits Gundlach No. 870 Concrete Nail Driver. more info
Orcon 13264 Hammer Hatchet & Tucker
$38.99
This handy multi-purpose tool was engineered specifically for the flooring professional. It has a hatchet blade on one side (with a rounded blade... more info
Plumb 11-418 20 oz. Fiber Rip Claw Hammer
$26.50
Plumb was the first to develop and introduce fiberglass hammer handles. Fiberglass handles are lightweight, but unbreakable in normal use. Fiberglass... more info
Plumb 11-435 20 oz. Wood Curved Claw Hammer
$24.67
Handles are made from North American red hickory, the traditional material for a striking tool handle. The continuous fibers of this oval shaped... more info
Plumb 11-439 22 oz. Wood Rip Claw Hammer
$27.31
Handles are made from North American red hickory, the traditional material for a striking tool handle. The continuous fibers of this oval shaped... more info
Roberts 10-114 20 oz. Ripping Hammer
$19.99
Roberts 10-114 20 oz. Ripping Hammer 14" sturdy, quality hickory construction. Long straight claw is ideal for pulling up old tack strip ... more info
Stanley 55-515 12-3/4" Wonder Bar Pry Bar
$16.40
Get the prying power you need with the 12-3/4 in. Wonder Bar® Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent... more info
Taylor Tools 431 Vaughan 30 oz. Flooring Hatchet
$38.73
Taylor Tools 431 Vaughan 30 oz. Flooring Hatchet 30 oz. Flooring Hatchet , large smooth face, drop forged, 3 ½” inch blade, triple... more info
Taylor Tools 438 Vaughan 999 Series 20 oz. Ripping Hammer
$31.37
Taylor Tools 438 Vaughan 999 Series 20 oz. Ripping Hammer 20 oz. Rip Hammer, smooth face, drop forged, 14 inch wood handle, superb balance,... more info
Taylor Tools 819 Vaughan Super Bar
$15.69
Taylor Tools 819 Vaughan Super Bar Vaughan’s Original Superbar ,”Shepard’s Crook” rocker head design, forged and tempered... more info
Taylor Tools 870 Concrete Nail Driver
$84.17
Sink concrete nails with a single blow from a standing position with the incredible #870 concrete nail driver. No misses and no damage to walls... more info
Taylor Tools 870.01 Concrete Nail Driver Replacement Tip
$28.05
Concrete Nail Driver Replacement Tip more info
Taylor Tools No. 867 Drive Down Bar
$53.40
Taylor Tools No. 867 Drive Down Bar For use under toe spaces, and other hard to reach places to drive nails in tackless strip, metal... more info
Vaughan SH2 22 Oz. Half Hatchet
$32.95
The Vaughan half hatchet works as a multi-purpose tool for cutting and hammering down tackless strip. The polished head includes a 3-1/2"... more info
Wiss M-3R Metalmaster Aviation Snips
$33.60
The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They... more info