The No. 525 is a wider kicker with a fifth row of pins (19 total pins) and a fourth nap grip that moves a wider section of carpet on every kick. Also...... more info
This tool for gouging out the back of rubber or vinyl base for tightly-wrapped corners comes with a double-tipped blade. The V-tip makes a sharp...... more info
This is a double-tipped replacement blade only for the No. 530 Rubber Base Gouge. It gouges out the back side of the cove base to produce tight...... more info
This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
This six foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
These top quality compound leverage metal snips are great for making straight cuts in aluminum accessory trims or sheet metal when necessary. The...... more info
This economical hammer tacker for stapling carpet pad takes 5000 series pad staples, ½” crown x 5/16” leg. Loading staples or clearing jams is...... more info
This replacement carbide-tipped blade is for use with the Crain No. 575, No. 545 or No. 555 Multi-Undercut Saw. This 36-tooth blade is specially...... more info
This new pull bar features a boxed "knuckle" hammering head that is welded to the body. The width has been increased to reduce body bending, and the...... more info
Clever new design allows the spacer to maintain the proper size gap, even when the adjacent wall is undercut. The V-Shape rests against the face of...... more info
This black plastic tapping block measures 3" x 7" x 3/4", with female grooves on one side and one end to mate with plank tongues. It fits tongue and...... more info
Improved with wider, heavier base and larger, ergonomic twist-knob that will accept an Allen wrench on the back side. Use to space planks from the...... more info
An optional adaptor for use with the Crain No. 565 Strap Clamp to facilitate clamping and holding planks with a bullnose rounded edge. Adaptor to...... more info
An optional adaptor for use with the Crain No. 565 Strap Clamp to facilitate clamping and holding planks with a bullnose rounded edge. Adaptor to...... more info
This 11/34" long tapping block is made from 3/4" thick solid plastic. It is used with a hammer to tap the sides or ends of planks together to...... more info
This versatile light-duty saw undercuts along walls, door jambs, under toe spaces, and will also fully undercut inside corners. The height of cut is...... more info
The No. 576 tapping block lifts LVP planks to the proper angle for tapping and locking tight. The large upper plastic block makes contact below the...... more info
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto...... more info
The No. 605 deluxe kicker features an all new soft synthetic rubber grip on the neck and a bright silver finish. The high profile body easily spans...... more info
This durable protective box is made from a telescoping ratchet tube. The No. 617 holds Duo-Fast No. 5418 Electric Tacker Staples and other similar...... more info
This durable protective box is made from a telescoping ratchet tube. The No. 618 holds Duo-Fast No. 7512 Hammer Tacker Staples and other similar...... more info
Shur-Fast staples are precision ground to a unique 60° angled “sharp point” (SP), and are coated with a special thermoplastic to better...... more info
This precision tip from Crain works with most popular models of glue guns and allows you to work at a convenient upright angle to seal carpet seam...... more info
