This powerful heat gun rapidly heats material with temperatures adjustable from 300° to 1000° F. Features a 6' heat-resistant cord and a switch...... more info
These 2 1/8 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These...... more info
These 3 inch long 16 gauge straight sewing needles are made for carpet seaming. They are rounded on the eyelet end, and sharp on the other. These...... more info
These 4 inch, 17 gauge curved sewing needles are sometimes referred to as “mattress needles”, but are also good for sewing carpet. They are...... more info
This thread is three ply waxed 100% polyester hand stitching thread that is wound on a plastic bobbin. The wax coating helps the thread pass smoothly...... more info
The No. 777 Toe-Kick Saw cuts flush to the inner wall of a toe space in a cabinet or counter to remove old underlayment. The new model No. 777 saw...... more info
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto...... more info
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto...... more info
This Carbide Tipped blade has 18 teeth and is 3-3/8" in diameter. Depth of cut is 3/4". This blade is compatible with all versions of the Crain...... more info
For use with the older version No. 795 Toe-Kick Saw only. This Carbide Tipped blade has 16 teeth and is 2-3/4" in diameter. Depth of cut is 3/8"...... more info
The No. 789 Diamond Saw Blade cuts 3/8" deep for tile repair. For use with Crain Toe-Kick Saws. Accessory diamond blade for use on Crain Model No....... more info
This 6-1/2" Combination steel blade has more teeth for smooth cuts. Caution: As these blades are subject to possible abuse, they are not guaranteed....... more info
No. 804 for use on discontinued Nos. 800 & 810 Super Saws. Carbide-tipped blade for use on discontinued Model Nos. 800 and 810 Super Saws.Blade...... more info
A dry-cut composition blade for masonry. Use with Crain 812 Super Saw or 825 H.D. Undercut Saws. Replacement 6 ½” diameter masonry blade for Crain...... more info
General purpose wood cutting blade. Use with Crain 812 Super Saw or 825 H.D. Undercut Saws. Carbide-tipped replacement blade for Crain No. 812 Super...... more info
Segmented rim, dry-cutting diamond blade. For undercutting ceramic tile, brick, concrete, stone, marble, or granite. Only for Crain 812 Super Saw or...... more info
The improved No. 835 Undercut Saw Kit replaces the No. 825 Saw with 60% more power! This powerful saw has a larger 6-1/2" diameter blade that can...... more info
This carbide-tipped replacement blade is for use ONLY with the Crain No. 835 Heavy Duty Undercut Saw for general purpose wood cutting. The larger...... more info
An optional dust cover for use with the Crain Nos. 825 & 835 saws. Use together with a vacuum connected to the dust control port on the saw for...... more info
The pulling claw features a compound leverage jaw and large contoured handle for pulling up glued-down flooring materials. The spring-loaded jaw...... more info
This handle assembly is for use with interchangeable miter mitre die sets to make radius bends and sharp corners in various aluminum cap metals....... more info
This metal mitre die set has an extra thick .135" punch for mitering corners on heavier gauge cap metals including carpet and wallboard cap. Used...... more info
This metal mitre die set has a relieved .090" thick punch for forming corners on most vinyl and carpet cap strip with at least a 3/32" opening. Used...... more info
This combo includes a handle and die set with relieved .090" punch for mitering most vinyl and carpet cap with at least a 3/32" opening. Makes corner...... more info
