ARDEX GPS
General Patch and Skimcoat
- Use to patch and skim coat concrete, wood, adhesive residues on concrete and more
- Install floor covering in 1 to 2 hours
- Suitable for residential and most commercial floor coverings
ARDEX GPS™ General Patch & Skimcoat is a trowelable patch and skim coat for use over interior concrete, wood, ceramic tile, and cutback and other non-water soluble adhesive residues on concrete.
Key Features
- Use to patch and skim coat concrete, wood, adhesive residues on concrete and more
- Blend of specially selected cements and polymers
- Install from a featheredge up to 1/2” (6 mm)
- Walk on in approximately 30 minutes
- Install floor covering in 1 to 2 hours
- Suitable for residential and most commercial floor coverings
Installation
Mixing Ratio: 5 quarts (4.75 liters) of water per one 25 lb. (11.34 kg) bag.
For smaller batches, use 2.5 parts powder to 1 part water by volume.
When using ARDEX E 25, use 2 quarts (1.9 liters) of additive and 3 quarts (2.8 liters) of water per 25 lb. (11.34 kg) bag.
Coverage (approx.): 65 sq. ft. (6 sq. m.) per bag at 1/8” (3 mm)
700 to 800 sq. ft. (65 to 74 sq. m.) at a skim coat
1200 to 1800 sq. ft. (111.5 to 167.2 sq. m.) as an embossing filler. Coverage will vary depending on the texture of the surface being smoothed.
Performance
Install Floor Covering: 1 to 2 hours
VOC: 0
Packaging: 25 lb. (11.34 kg) net weight bags
Storage: Store in a cool dry area. Do not leave bags exposed to sun.
Shelf Life: One year, if unopened
