DriTac RS-2 Repair Adhesive
Engineered Wood Floor Repair Adhesive
Sika-DriTac has developed a repair system to correct the hollow spots and popping conditions for engineered wood flooring installations when other adhesives fail to get the job done. These defects cost the flooring industry millions of dollars per year. Studies and experience show that a major cause of these problems for engineered wood floor installations are adhesive voids between the flooring and the subfloor.
Read more
• Functional and easy to use for both the professional flooring installer and the “do it yourselfer”
• Hollow spot or void beneath the flooring is completely filled with the repair adhesive, truly repairing the problem! (Epoxy repair kits only tack down a small section of the problem area)
• Drill bit and applicator tips are much smaller in diameter than conventional repair kits, creating a smaller hole which is easily hidden with wood putty
• No need to weigh down the repaired area
• Cost per repair is a fraction of the cost of epoxy
• Floor can be walked on immediately after the repair. No set up time is required!
• Multi-Ply Engineered Plank
Packaging
• 1- One Quart of DriTac Repair Adhesive
• 1- 60cc Plastic Syringe Assembly
• 2- Metal Tips
• 2- Drill Bits
• Dowels
• 1- Dowel Punch
- There are 6 EA per CT
- There are 30 CT per PA
- There are 1 EA per QT
- There are 1 LB per EA
• Refill adhesive available in quarts (RS-2) and gallons (RS-8)
