Made of aluminum. Opens up to 105" in length (60" closed). Lightweight and rustproof.Adds up to 8 feet 8 inches of length to a stretcher in 4 inch...... more info
This tool provides a simple means of stretching stairs and forming carpet around the stair nosing. Hook the claw on the stair and pull the handle...... more info
The tall seam repair legs for the Crain No. 515 Mini-Stretcher create a 9" high by 10" wide working area beneath to run a seaming iron. Each leg...... more info
The Swivel-Lock Stretcher gives you the benefits of both straight and swivel heads. The head has a 60° of free swivel for patterned carpet. Depress...... more info
The No. 520Z Cotton Grip Head is for use with Crain No. 520 Swivel-Lock Stretcher and is recommended for use with Berbers and low level commercial...... more info
The No. 525 is a wider kicker with a fifth row of pins (19 total pins) and a fourth nap grip that moves a wider section of carpet on every kick. Also...... more info
This is a double-tipped replacement blade only for the No. 530 Rubber Base Gouge. It gouges out the back side of the cove base to produce tight...... more info
This tool for gouging out the back of rubber or vinyl base for tightly-wrapped corners comes with a double-tipped blade. The V-tip makes a sharp...... more info
This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
This three foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
This six foot aluminum straight edge is economical and lightweight. It is useful for most carpet installation purposes, but does not have the...... more info
These top quality compound leverage metal snips are great for making straight cuts in aluminum accessory trims or sheet metal when necessary. The...... more info
This economical hammer tacker for stapling carpet pad takes 5000 series pad staples, ½” crown x 5/16” leg. Loading staples or clearing jams is...... more info
This new pull bar features a boxed "knuckle" hammering head that is welded to the body. The width has been increased to reduce body bending, and the...... more info
This black plastic tapping block measures 3" x 7" x 3/4", with female grooves on one side and one end to mate with plank tongues. It fits tongue and...... more info
An optional adaptor for use with the Crain No. 565 Strap Clamp to facilitate clamping and holding planks with a bullnose rounded edge. Adaptor to...... more info
An optional adaptor for use with the Crain No. 565 Strap Clamp to facilitate clamping and holding planks with a bullnose rounded edge. Adaptor to...... more info
This 11/34" long tapping block is made from 3/4" thick solid plastic. It is used with a hammer to tap the sides or ends of planks together to...... more info
The No. 576 tapping block lifts LVP planks to the proper angle for tapping and locking tight. The large upper plastic block makes contact below the...... more info
The No. 605 deluxe kicker features an all new soft synthetic rubber grip on the neck and a bright silver finish. The high profile body easily spans...... more info
This durable protective box is made from a telescoping ratchet tube. The No. 617 holds Duo-Fast No. 5418 Electric Tacker Staples and other similar...... more info
This durable protective box is made from a telescoping ratchet tube. The No. 618 holds Duo-Fast No. 7512 Hammer Tacker Staples and other similar...... more info
Shur-Fast staples are precision ground to a unique 60° angled “sharp point” (SP), and are coated with a special thermoplastic to better...... more info
This precision tip from Crain works with most popular models of glue guns and allows you to work at a convenient upright angle to seal carpet seam...... more info
