This 7" tile saw is a lightweight portable saw designed to give professional cuts on tile and stone.
This saw features:
- 17" Straight Cut & 12" Diagonal Cut
- A large (14-1/2" X 14-1/2") cutting table mounted on ball bearing rollers with an injection molded rubber top to reduce vibration and securely hold tile in place for accurate cuts
- A rubber topped cutting table with slots molded on a 45° angle to act as diagonal cutting guides and also channel water back to the tray
- The last 1" of the rubber top molded solid up to the tile backstop to eliminate end-of-cut corner breaking caused by insufficient tile support
- A removable scale (tile backstop) to permit freehand cutting of oversize material that is also marked with 1/4" graduations to 8" on the left side and 6" on the right side
- Cutting table that can be secured by a spring loaded lock to prevent loss during transport
- A powerful 1 HP motor that has a patented cooling inlet that draws air away from the side opposite the cutting mist to give longest motor life, thermal overload protection, and a water pump plug receptacle
- Liquid Cooled Bearing Housing (LCBH), a patented design that directs blade cooling water through the bearing housing to prevent overheating of the blade shaft bearings
- Fully guarded belt driven blade shaft that is adjustable for cutting height
- Removable blade guard with cooling water directed to both sides of the blade and a molded rubber splash guard
- Plastic water tray with a frame mounted water pump retaining bracket, a drain plug and a two year warranty against breakage in normal use
- Steel construction with zinc plated angle rails and a powder coated frame
- C-UL Listed motor and water pump and one year warranty
- Included Items: Water pump, Wrench, Owner's manual, No. 1000-35 45°/90° Flat Cutting Guide, and No. 700-34 45°/60° Small Miter Guide
