ROBERTS 1550 MAXCOMPLETE Polyurethane Adhesive - 4 Gal

ROBERTS® 1550 MAXCOMPLETE® Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. It is formulated to bond with APA/ PSI-95 rated plywood, hardwood, underlayment-grade oriented strand board (lightly sanded), primed gypsum-based subflooring, radiant heated slabs, rubber sports flooring, and properly prepared ceramic tiles (existing flooring). It can be applied with a 1/4 in. Flat V-Notch trowel when moisture mitigation is NOT necessary and with a 1/4 in. x 3/16 in. Tiger Tooth trowel for moisture mitigation purposes. It has an open time and working time of up to 60 minutes, and a curing time of approximately 24 hours. It can be sanded after 18 hours. It covers up to 40 sq. ft. per gallon. This adhesive has low odor, is LEED EQC 4.1 Compliant and VOC less than 15 g/L.

Available Size:
1550-4 - 4 Gallon

• For use when installing engineered wood, solid wood, parquet, and bamboo flooring
• Polyurethane adhesive formulated to bond with concrete, plywood, and cement board, offering sound mitigation and a higher level of elongation
• Highly elastomeric to adapt to the natural expansion and contraction of wood
• CURING time: Approximately 6 to 8 hours for light foot traffic when applied with adhesive- only trowel, and 12 hours when applied with moisture-control trowel. Can be sanded after 18 hours
• VOC less than 60, low odor, LEED EQC 4.1 Compliant
• Covers approximately 30-35 sq. ft. per gallon
• Clean off by using ROBERTS 5505 Urethane Adhesive Remover

California Residents: Proposition 65 Warning!